JOINT AND EXPANSION JOINTS

Manycon Saudi is one of the best Joint & Expansion joint Company in Saudi Arabia & all GCC & India

In Saudi Arabia, Manycon Construction Company providing excellent Firestopping for commercial and public Building. A head of wall joint is the linear gap between the top or 'head' of the wall and the bottom of the floor or roof. All buildings, whether they are existing, new builds, residential, or non-residential, are required by law to have effective firestopping installed.


HEAD OF WALL JOINT

Firestopping, joint protection and perimeter fire barriers are designed to limit flame and smoke spread through penetrations in a fire-rated wall, floor, and ceiling assembly; joints and barriers offer the needed protection to keep the building structure and its occupants safer.



Other List of Manycon Services;

🔴 Fire Stop

🔴 Asphalt Laying

🔴 Road Marking - Cold and Hot

🔴 Fire proofing

🔴 Cable Coating

🔴 Epoxy flooring

🔴 Gypsum and Painting

🔴 Water tight Sealant

🔴 Crack Injection

🔴 Interlock fixing

🔴 Smoke test / leak test - Duct leak

🔴 Integrity Testing - Door Fan Test

🔴 Sand Blasting

🔴 Fire Door Inspection

🔴 Cutting and Coring Services

🔴 Ventilation Testing

🔴 DC68 Fire Retardant Spray

Comments

Post a Comment

Popular posts from this blog

PASSIVE FIRE PROTECTION

Image
Manycon Saudi is one of the best Firestop Contractors in Saudi Arabia & all GCC & India Firestopping in Saudi by Manycon is  the use of fire-resistant seals to maintain the integrity of passive fire protection systems and block fire and smoke from spreading . A firestop or fire-stopping in Saudi by Manycon is a form of passive fire protection that is used to seal around openings and between joints in a fire-resistance-rated wall or floor assembly. Firestops are designed to maintain the fire-resistance rating of a wall or floor assembly intended to impede the spread of fire and smoke.  A comprehensive fire-stopping set-up includes components like mortars, silicone, firestop pillows, mineral fibres, and rubber compounds. Manycon is an ISO 9001:2015, ISO 14001:2015, and ISO 45001:2018 certified organization in all the countries where it has its presence. The company is accredited with FCIA  & UL approvals with  DRIs (Designated Responsible Individual) and ha...
Read more

FM200 ROOM INTEGRITY TEST

Image
  Manycon Saudi is one of the best FM200 Room Integrity Contractors in Saudi Arabia & all GCC & India The ability for the gaseous agent to be retained in the protected room for an extended period of time is critical to the performance of any total flooding clean agent fire extinguishing system. NFPA 2001, Standard on Clean Agent Fire Extinguishing Systems, requires that a minimum concentration of 85% of the adjusted minimum design concentration be held at the highest level of combustibles for a minimum period of 10 minutes. Those installing these systems are required to perform a Room Integrity Fan Test to assure the protected room will hold the agent for the required period of time . A Room Integrity Fan Test, also known as a Door Fan Test, is simply a way to measure the leakage of an enclosure. A large fan is temporarily installed in the doorway of the room to be tested, with the fan blowing into the room (pressurizing the room). The fan speed is adjusted to obtain fl...
Read more