PASSIVE FIRE PROTECTION

Manycon Saudi is one of the best Firestop Contractors in Saudi Arabia & all GCC & India

Firestopping in Saudi by Manycon is the use of fire-resistant seals to maintain the integrity of passive fire protection systems and block fire and smoke from spreading.

A firestop or fire-stopping in Saudi by Manycon is a form of passive fire protection that is used to seal around openings and between joints in a fire-resistance-rated wall or floor assembly. Firestops are designed to maintain the fire-resistance rating of a wall or floor assembly intended to impede the spread of fire and smoke.  A comprehensive fire-stopping set-up includes components like mortars, silicone, firestop pillows, mineral fibres, and rubber compounds.

Manycon is an ISO 9001:2015, ISO 14001:2015, and ISO 45001:2018 certified organization in all the countries where it has its presence. The company is accredited with FCIA  & UL approvals with  DRIs (Designated Responsible Individual) and has been approved by civil defence and various other authorities across the region.

Manycon employ a highly qualified adequate team of firestop inspectors under one roof that helps to maintain fire-stopping & Passive fire protection compartmentation solutions following the listing, approval use, and compliance with various building and structural code requirements. Whether it’s fire and life safety for multi-story buildings, schools, hospitals, shopping malls, or other structures, we comply and deliver end-to-end fire-stopping solutions.


Comprehensive Fire Stopping Solutions for

  •       MEP,
  •      Joints, and
  •      Curtain Walls

DUCT WORKS & ENCLOSURES;

The  purpose of the passive fire proofing is to insulate the structural steel in a fire situation and increases the time before the steel loses its design margin of safety. This usually occurs at steel temperature of around 400°C to 600°C. The period of fire resistance is normally 30minutes, 60minutes, 120minutes, 150minutes, and 180minutes and may be up to 4 hrs. This duration is depended on type of structure, usage, size, and overall height. Based on the fire rating requirement, the application thickness shall also vary. Primary objectives of fireproofing: Save life by allowing safe evacuation of people Allow safe access for firefighters Protect the building from structure failure.


PENETRATION FIRE SEALING;

Firestop Systems – An Essential Asset for Occupants and Owners Limits the spread of fire by containing it in a single compartment in its area of origin. Slows the spread of toxic gas and black smoke, allowing people more time to escape more safely Provides vital escape time for people during fire incidents. Protects escape routes, building structure and critical structural members. Minimizes costs to rebuild after the fire Protects owners’ built assets.



SHAFT FIRESTOP - LARGE OPENING;

Pillows and boards are used for large penetrations such as cable trays and busducts. Each material has different requirements of installation from width of annular space the product is permitted to fill, depth of product in space, total area of installation, etc.



Other List of Manycon Services;

🔴 Fire Stop

🔴 Asphalt Laying

🔴 Road Marking - Cold and Hot

🔴 Fire proofing

🔴 Cable Coating

🔴 Epoxy flooring

🔴 Gypsum and Painting

🔴 Water tight Sealant

🔴 Crack Injection

🔴 Interlock fixing

🔴 Smoke test / leak test - Duct leak

🔴 Integrity Testing - Door Fan Test

🔴 Sand Blasting

🔴 Fire Door Inspection

🔴 Cutting and Coring Services

🔴 Ventilation Testing

🔴 DC68 Fire Retardant Spray




Comments

Post a Comment

Popular posts from this blog

FM200 ROOM INTEGRITY TEST

Image
  Manycon Saudi is one of the best FM200 Room Integrity Contractors in Saudi Arabia & all GCC & India The ability for the gaseous agent to be retained in the protected room for an extended period of time is critical to the performance of any total flooding clean agent fire extinguishing system. NFPA 2001, Standard on Clean Agent Fire Extinguishing Systems, requires that a minimum concentration of 85% of the adjusted minimum design concentration be held at the highest level of combustibles for a minimum period of 10 minutes. Those installing these systems are required to perform a Room Integrity Fan Test to assure the protected room will hold the agent for the required period of time . A Room Integrity Fan Test, also known as a Door Fan Test, is simply a way to measure the leakage of an enclosure. A large fan is temporarily installed in the doorway of the room to be tested, with the fan blowing into the room (pressurizing the room). The fan speed is adjusted to obtain fl...
Read more

JOINT AND EXPANSION JOINTS

Image
Manycon Saudi is one of the best Joint & Expansion joint Company in Saudi Arabia & all GCC & India In Saudi Arabia, Manycon Construction Company providing excellent Firestopping for commercial and public Building. A head of wall joint is the linear gap between the top or 'head' of the wall and the bottom of the floor or roof. All buildings, whether they are existing, new builds, residential, or non-residential, are required by law to have effective firestopping installed. HEAD OF WALL JOINT Firestopping, joint protection and perimeter fire barriers are designed to limit flame and smoke spread through penetrations in a fire-rated wall, floor, and ceiling assembly; joints and barriers offer the needed protection to keep the building structure and its occupants safer. Other List of Manycon Services; 🔴 Fire Stop 🔴 Asphalt Laying 🔴 Road Marking - Cold and Hot 🔴 Fire proofing 🔴 Cable Coating 🔴 Epoxy flooring 🔴 Gypsum and Painting 🔴 Water tight Sealant 🔴 Crac...
Read more